Good Quality OMZ – ENT JH OMZ Series Motor to Stuttgart Manufacturer
Short Description:
1.It is simple structure, showing good performance under low speed,the unit weight power is much higher than other types; 2.Small volume,low weight,the displacement rang from80-800ml/r,wide rotational speed scope; 3.Shaft seal can bear high backpresssure. 4.The output shaft adopts tapered roller bearings that permint high axial and radial forces under short time overloading; 5.There are two forms distributions;with shaft distribution flow or with disc distribution flow in the wide of applica...
Good Quality OMZ – ENT JH OMZ Series Motor to Stuttgart Manufacturer Detail:
| 型号 |
理论排量
(ml/r) |
压力(Mpa)
|
扭矩(N.m)
|
最大功率
(Kw) |
重量
(Kg) |
最高转速
(r/min) |
||
|
额定压力
|
尖峰压力
|
额定扭矩 | 单位扭矩 (N.m/Mpa) |
|||||
| ENT JH50 | 50 | 12.4 | 13.8 | 73 | 5.9 | 7.5 | 20~859 | |
| ENT JH63 | 63 | 12.4 | 13.8 | 86 | 6.9 | 7.5 | 20~774 | |
| ENT JH80 | 80 | 12.4 | 13.8 | 124 | 10 | 10.5 | 20~811 | |
| ENT JH100 | 100 | 12.4 | 13.8 | 154 | 12.9 | 10.8 | 20~669 | |
| ENT JH125 | 125 | 12.4 | 13.8 | 194 | 15.6 | 11.1 | 20~544 | |
| ENT JH160 | 160 | 11.5 | 12.4 | 228 | 19.8 | 10.1 | 20~425 | |
| ENT JH200 | 200 | 11.0 | 12.4 | 285 | 25.9 | 10.1 | 20~339 | |
| ENT JH250 | 250 | 10.0 | 12.4 | 304 | 30.4 | 8.9 | 20~281 | |
| ENT JH320 | 320 | 9.0 | 12.4 | 364 | 40.4 | 7.9 | 20~208 | |
| ENT JH400 | 400 | 9.0 | 11.0 | 466 | 51.8 | 8.3 | 20~171 | |
| ENT JH500 | 500 | 8.3 | 9.0 | 496 | 59.8 | 7.1 | 20~136 | |
Dimensions
Product detail pictures:
Our personnel are often while in the spirit of "continuous improvement and excellence", and using the exceptional good quality items, favorable rate and great after-sales products and services, we try to get just about every customer's belief for Good Quality OMZ – ENT JH OMZ Series Motor to Stuttgart Manufacturer, The product will supply to all over the world, such as: Kyrgyzstan , Grenada , Philippines , Strict quality control is executed in each link of the whole production process.We sincerely hope to establish the friendly and mutual-beneficial cooperation with you. Based on high quality merchandise and perfect pre-sales /after-sales service is our idea, some clients had cooperated with us for more than 5 years.
MAKElog#2:
An SRF05 Ultrasonic distance sensor is tested and the output impulse length is measured.
Measured values taken from the video of
Distance vs. Impulse length
5 cm 0,30 ms
10 cm 0,52 ms
20 cm 1,15 ms
25 cm 1,40 ms
30 cm 1,72 ms
35 cm 2,00 ms
40 cm 2,29 ms
50 cm 2,85 ms
A microcontroller (Atmel, TI, Microchip) can be used to measure the impulse length and do actions depending on the distance.
Have fun! 
Font used: http://www.fontsquirrel.com/fonts/Andika-Basic
By Kim
from Oman
- 2015.06.05 13:10
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Erica
from Vatican City(Holy See)
- 2015.06.28 19:27
